Purchased the rest of the perspex from Maisey’s and started cutting out the holes in the perspex for the control panel. Disaster struck – I pushed down on the drill too hard and it cracked 🙁
2nd attempt – a few lessons learned. Take it slower and drill half the depth from each side of the perspex. The holes then came out perfect.
Fitted the joysticks to the control panel.
Also added a mains rocker switch to the cabinet so I can have one switch will will switch on the PC, lights, TV etc.
Added in screw caps
Gave the MDF a light sanding, filled in a few holes, masked off the TV and am now ready to apply the primer. Wood work finally done!